Table of Contents
Advertisement
Control System
LCD screen
The control unit is equipped with an LCD screen with adjustable lighting and contrast. Signals are displayed either
graphically or as numerical values. All alarms are displayed on the screen as text messages.
22
Contrast and lighting control
Push the CONFIGURATION button(11) to access the
lighting and contrast menu. Then push the correspon-
ding buttons to adjust levels. Push EXIT to store the
settings. The display has 4 lighting levels.
NOTE! Pushing all four white buttons simultaneously
will reset contrast and lighting to default values.
Configuration menu
To enter the CONFIG MENU, push the CONFIGURA-
TION button (11) for at least three (3) seconds.
Units
The displayed units are user-defined.
Pressure: kPa, PSI
Volume: LITRE, GAL Imperial GAL
Fuel rate: L/H, GAL/H, IGAL/H
Temperature: °C, °F
Settings
Language: 8 languages available
Bleep: Buttons are bleeping when pressed (On/Off)
Display: Set the range engine rpm gauge
Engine rpm: [2500 rpm:9000 rpm] step 500 rpm
Graph range: 2 MIN,10 MIN, 30 MIN, 60 MIN,
2 HRS, 4 HRS, 8 HRS
Alarm status
The alarm status page shows the current active
alarms list (same as when an alarm is first received).
Refer to section "Alarm list".
Hide quick links:
Advertisement
Table of Contents
