Longshine RDT-150F Series User Manual
  1. Manuals
  2. Brands
  3. Longshine Manuals
  4. Touch terminals
  5. RDT-150F Series
  6. User manual

Longshine RDT-150F Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Fanless / Classy / High Performance
RDT-150F System Series
USER'S MANUAL
Windows POS systems
Intel Celeron Processor J1900 technology
Version: 1.1
Date: February 15, 2016

Advertisement

Table of Contents
loading

Related Manuals for Longshine RDT-150F Series

Summary of Contents for Longshine RDT-150F Series

  • Page 1 Fanless / Classy / High Performance RDT-150F System Series USER’S MANUAL Windows POS systems Intel Celeron Processor J1900 technology Version: 1.1 Date: February 15, 2016...
  • Page 2 Preface About this Manual Thank you for purchasing POS RDT-150F Series All-in-One system. This terminal offers all the enhanced features and is easy to connect to various optional devices for optimal performance. This user manual describes how to setup and connect to user’s terminal.
  • Page 3 Preface Federal Communications Commission (FCC) Declaration of Conformity This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesirable operation.
  • Page 4 Important Safety Information BEFORE YOU PROCEED  Read the safety notices and the User’s Manual carefully before using the product.  Keep the box and packaging in case the product needs to be shipped in the future.  Follow the product and warning label instructions. ...
  • Page 5 Important Safety Information OPERATING INSTRUCTIONS  Keep the User’s Manual for future reference.  Follow the product label instructions.  Lay this terminal on a stable surface when installing. Heavy objects placed on the product can cause damage or obstruct proper ventilation. ...

  • Page 6: Table Of Contents

    Index CONTENTS INTRODUCTION........................7 ........................7 ACKAGE ONTENTS ............................8 EATURE ............................9 UTLOOK ....................10 IMENSION AND PERATION NGLE .........................14 ONNECTOR ANEL HARDWARE SETUP ........................ 15 .......................15 INSTALLATION OTICE ........................15 ARDWARE SSEMBLY 2.2-1 Motherboard Introduction .....................15 2.2-2 MSR and 2-in-1 Reader Installation ..................19 2.2-3 VFD Customer Display Installation ..................21 2.2-4...

  • Page 7: Introduction

    Driver CD * 1 Jumper * 5 Besides above standard items with POS RDT-150F Series terminal, we also provide MSR, VFD customer display, 2-in-1 Reader and peripheral accessories as an optional. Please refer to below for more info of optional items:...

  • Page 8: Feature

    Introduction 7” / 10” second display 1.2 Feature RDT-150F Series terminal comes with the following features:  Low power consumption LV (Low Voltage) design of the device is embedded with a unique chipset renders power saving function.  Saving cost of ownership...

  • Page 9: Outlook

    Introduction 1.3 Outlook RDT-150F POS terminal is easy-to-use and designed to enhance user business flexibility by offering a superior customer experience. Please follow the below instructions for more info of RDT-150F Series Terminal outlook and dimension. Elegant, Solid, Fashionable Compact Design Control Buttons I/O Connector Ports Power on/off, Up/Down, Reset...

  • Page 10: Dimension And Operation Angle

    Introduction 15" TFT-LCD 1024 X 768 Resolution Touch Monitor Stand 1.4 Dimension and Operation Angle 15” POS RDT-150F Terminal standard Dimensions: 2016/02/15 Version: 1.1...
  • Page 11 Introduction 15” POS RDT-150F Terminal with MSR Dimensions: 15” POS RDT-150F Terminal with 2- in -1 Reader Dimensions: 2016/02/15 Version: 1.1...
  • Page 12 Introduction 15” POS RDT-150F Terminal with VFD Customer Display Dimension: 15” POS RDT-150F Terminal with 7” 2 Display: 2016/02/15 Version: 1.1...
  • Page 13 Introduction 15” POS RDT-150F Terminal with 10” 2 Display: Adjustable LCD Operation Angle “Super Firm and Perfectly Secured LCD display Angles from 90 ~ 180 degree.” 2016/02/15 Version: 1.1...

  • Page 14: Connector Panel

    Hardware Setup 1.5 Connector Panel The connector panel is located at the bottom of the main unit base. Please place the display to 180 degree to reach the connector I/O ports. Chart of the connector panel: I/O Port Connector Type Description COM 1, COM2 / COM3 / COM4 Serial Ports with 5V/12V COM Port...

  • Page 15: Hardware Setup

    Hardware Setup 2. Hardware Setup This chapter introduces how to setup and assemble optional accessories for POS RDT-150F 2.1 Pre-installation Notice Please read the following notice carefully before you start to setup POS RDT-150F terminal: 1. The POS RDT-150F terminal supports POS Ready 7 , Win 7 and Win8.1 OS. 2.
  • Page 16 Hardware Setup STEP 3 Kindly refer to below table for main board introduction. 12 13 14 15 2016/02/15 Version: 1.1...
  • Page 17 Hardware Setup Item Function DC_JACK USB 2.0 Port LAN RJ_45 Port VGA Port (VGA1) USB 2.0 Port HDMI Port (HDMI1) Line Out (Green) Microphone (Pink) PWR_COM3 Jumper PWR_COM4 Jumper PWR_COM6 Jumper Internal COM Port Headers COM 1, 2, 3, 4, 6 (RS232) Printer Port Header 2016/02/15 Version: 1.1...
  • Page 18 Hardware Setup USB 2.0 Connector mSATA Select 1-2: SATA2_2 + mini PCIe 2-3: mSATA, SATA2_2 no function USB 2.0 Connector for MSR / 2-in-1 Reader Important Notice: The default power electricity for RDT-150F COM port is 0, please follow item 9, 10, 11 intructions to change the power electricity.

  • Page 19: Msr And 2-In-1 Reader Installation

    Hardware Setup 2.2-2 MSR and 2-in-1 Reader Installation An optional Magnetic Stripe Reader (MSR) or 2-in-1 Reader can be installed on the right side of RDT-150F Terminal. This chapter will indicate how to install MSR / 2-in-1 Reader on your device. Before installing, kindly check the package content first.
  • Page 20 Hardware Setup STEP 3 When plug MSR / 2-in-1 reader cable to USB pin header successfully, please open the below hole on the right side of device to pull out MSR / 2-in-1 cable. STEP 4 Assemble the terminal and screws MSR / 2-in-1 Card Reader to the back side of the monitor STEP 5 MSR / 2-in-1 Reader Integration completed.

  • Page 21: Vfd Customer Display Installation

    Hardware Setup 2.2-3 VFD Customer Display Installation This chapter will indicate how to install VFD customer display on your device. Please follow below steps & check the package contents when installing VFD to RDT-150F. VFD Customer Display Package Content Includes: VFD * 1 Screw * 2 Driver CD * 1...
  • Page 22 Hardware Setup STEP 3 Turn on VFD customer display power switch, and then turn on system power. Important Notice: The default power electricity for RDT-150F COM port is 0. Please change the power electricity to 5V or 12V before installing VFD customer display. changing power electricity.

  • Page 23: Hdd/Ssd Kit Installation

    Hardware Setup 2.2-4 HDD/SSD kit Installation RDT-150F embedded 2.5" SATA II HDD/SSD kit as the factory setting. User can exchange storage if needed. Please follow the below instructions for exchanging storage. STEP 1 Please turn off the system power. STEP 2 Please position the terminal as shown below on the working table and find the 2.5”...
  • Page 24 Hardware Setup Important Notice: The terminal may be damaged if user aslant push in HDD / SSD kit. Please parallel push HDD or SSD kit into the device. 2016/02/15 Version: 1.1...

  • Page 25: Specifications

    Software Setup 3. Software Setup This chapter introduces how to install driver & calibrate touch panel for POS RDT-150F 3.1 Touch Panel calibration RDT-150F can support Win 7 and Win8.1. Before using RDT-150F, please install the OS system as factory recommend. Please follow the below instructions to calibrate the touch panel when successfully install OS system.
  • Page 26 Software Setup STEP 2 Please open “eGalax Touch” program to select “Tool” page and click “4 points calibration” items for touch panel calibration. 2016/02/15 Version: 1.1...
  • Page 27 Software Setup STEP 3 Please click 4 points of screen for calibration. 2016/02/15 Version: 1.1...
  • Page 28 Software Setup 2016/02/15 Version: 1.1...
  • Page 29 Software Setup STEP 4 After 4 points calibration complete, please click “ok” as below picture to continue using the terminal. Important Notice: Please calibrate the touch panel before using the ternimal. 2016/02/15 Version: 1.1...

  • Page 30: Specifications

    Specifications 4. Specifications Hardware Specification Intel® Celeron® Processor J1900 (Clockspeed: 2.0 GHz, Turbo Speed: 2.4 GHz, Cores: 4) System Memory 2GB Standard, Maximum 8G (DDR3L SO-DIMM scoket x 2) Graphics Intel® Gen7 Intel® Graphics DX 11, OGL3.2 Audio Realtek ALC662 HD Audio 15"...
  • Page 31 Specifications EMI/Safety CE, FCC Class A Operating 0°C ~ 40°C (32°F ~ 104°F) Temperature Storage Temperature - 10°C ~ 55°C (14°F ~131°F) Relative Humidity 10% ~ 90% (Non-Condensing) Dimension Dimension 380(W) x 217(D) x 306(H) mm Weight 5.3Kg Other Indicator Powe LED + HDD LED Button Power on/off , Reset,UP/Down...

Table of Contents