RH Baby&child SLOANE Assembly Instructions

PARTS INCLUDED

A.SIDE RAILS (2)
B.FRONT RAIL (1)
C.HEADBOARD (1)
D.SLATS (4)
E.PLATFORM PANELS (2)
F.TRUNDLE (1)

TOOLS NEEDED

Phillips-head Screwdriver (not included)
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
Bed must be assembled by at least two people.
Please read instructions carefully before assembling bed.
Use the above parts and hardware list to identify each component.
Keep all packing materials until assembly is complete to avoid loss of smaller parts.
1. Stand the Headboard (C) upright and attach Side Rails (A), as shown in Diagram I.
2.
Hook the Front rail (B) to the Side Rails (A), then tighten the bolts by using Allen Key (1), as shown in Diagram II.
Place the Slats (D) on the top of the Side Rail s' ' side slats and fasten using Screw (3), as shown in Diagram III.
3.
4.
Lay the Platform Panels (E) on the top of the Slats (D), then fasten using Screw (2), as shown in Diagram IV.
5.
Push the Trundle (F) into the daybed frame, making sure the Trundle front panel is flush with the daybed
Front Pane; l (B).

CARE INSTRUCTIONS

Spot clean only with a soft, damp cloth.
SLOANE TRUNDLE DAYBED FULL - ASSEMBLY INSTRUCTIONS
1
2
3
'
DESCRIPTION
Allen key (0.5cm Dia.)
Screws (3cm)
Screws (4cm)
Page 1 of 2
1 pc.
16 pcs.
8 pcs.