Download Print this page
RH Baby&child AVALON FULL OVER FULL BUNK BED Instructions Manual

RH Baby&child AVALON FULL OVER FULL BUNK BED Instructions Manual

Hide thumbs Also See for AVALON FULL OVER FULL BUNK BED:

Advertisement

Quick Links

Made in Vietnam
Distributed in the U.S.A. by:
Restoration Hardware Baby & Child
11640 Harrel St. Suite B
Mira Loma, CA 91752
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7
WARNING: Read all instructions before assembling this product.
KEEP INSTRUCTIONS FOR FUTURE USE.
If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to the address above. Include the
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft, dry cloth. Blot spills immediately and wipe
with a clean damp cloth. If the crib is to be stored, store in a cool dry place and carefully package all original hardware to protect from loss.
NOTE: When inserting bolts, turn clockwise until tight. Then loosen
completely assembled, return to each bolt and tighten. Use wax or soap on all bolts to facilitate assembly.
CUSTOMER SERVICE
product model number, color, and a brief description of the part.
Call 1-800-762-1751.
CARE AND CLEANING
TOOLS AND INSTALLATION
Tools Necessary: Wrench (included)
Screwdriver (not included)
Note: It may be easier to assemble product with two people.
1
3
-
of a turn. After bunks is
2
4
Page 1 of 9

Advertisement

loading
Need help?

Need help?

Do you have a question about the AVALON FULL OVER FULL BUNK BED and is the answer not in the manual?

Questions and answers

Summary of Contents for RH Baby&child AVALON FULL OVER FULL BUNK BED

  • Page 1 Made in Vietnam Distributed in the U.S.A. by: Restoration Hardware Baby & Child 11640 Harrel St. Suite B Mira Loma, CA 91752 www.rhbabyandchild.com Distributed in Canada by: Restoration Hardware Canada, Inc. 1500-1055 West Georgia Street Vancouver, British Columbia V6E4N7 WARNING: Read all instructions before assembling this product. KEEP INSTRUCTIONS FOR FUTURE USE.
  • Page 2 IMPORTANT SAFETY INFORMATION FOR BUNK BED WARNING 1. Follow the information on the WARNINGS appearing on the upper bunk end structure and on the carton. To help prevent serious or fatal injuries from entrapment 2. Always use the specified size mattress, mattress support, or both to help of falls: prevent the likelihood of entrapment or falls.
  • Page 3: Parts Included

    COMPONENT IDENTIFICATION AND HARDWARE PARTS INCLUDED E [10] BED SLATS [1] HEADBOARD F [4] PLATFORM PANELS FOOTBOARD G [1] LADDER LOWER SIDE RAILS H [1] TRUNDLE UPPER SIDE RAILS Page 3 of 9...
  • Page 4 IMPORTANT These bed parts can be cumbersome and heavy to some people, therefore the assistance of two or more people is recommended in order to prevent personal injury and ensure the bed parts are not damaged during the assembly process. ASSEMBLY INSTRUCTIONS Lay the headboard (A) and the footboard (B) on a flat surface.
  • Page 5 Hold the headboard (A) upright in the position you wish the bed to be in when fully assembled. Align the threaded rods (1) on the headboard to the bore holes in the end of the lower side rail (C). Push the lower side rail up against the headboard.
  • Page 6 Align the threaded rods (1) on the footboard (B) to the corresponding holes in the end of the lower side rails (C) and the upper side rails (D). Push the footboard up against the side rails. Repeat step 5, 6, and 7 to attach the side rails to the footboard. Honeycomb with total thickness ~230mm Page 6 of 9...
  • Page 7 10. Set the bed slats (E) on the slat holders of the lower side rails (C) and the upper side rails (D). Secure each slat by using screw (6) provided. See FIGURE 5. 11. Place the platform panels (F) on the lower bunk and the upper bunk, then fix them with screws (6). See FIGURE 6. FIGURE 5 Fig.
  • Page 8: Metal Bracket

    NOTE: For the default setting, the ladder will be attached on the right side of the footboard (so the guard rail is pre-attached on the left side of the footboard). If you want to attach the ladder on the left side please unscrew and move the guard rail to right side of the footboard. Re-install the screws and metal bracket to secure the guard rail.
  • Page 9 12. Hook the ladder (G) on the footboard then secure it with screws (7) as per illustration in FIGURE 9 and FIGURE 10. 13. Slide the trundle (H) underneath the bunk bed as in FIGURE 11. Assembly is complete. FIGURE 9 FIGURE 10 no screw Fig.