Time And Date - Smiths Medical CADD Solis VIP 2120 Clinicians Manual

Sound Theme
The Sound Theme setting allows you to
choose between three different sound
themes for the alarms and beeps that
the pump makes. The three themes are
standard, intense, and distinctive. You
may preview the sound themes in the
menu. The alarms and beeps that use
the sound theme are:
• High Priority Alarm
• Medium Priority Alarm
• Low Priority Alarm
• Informational Alarm
To preview/choose a sound theme:
1. In the Display and Sounds Settings
menu, press ▲ or ▼ to highlight
Sound Theme and press Select
2. Press ▲ or ▼ to highlight Standard,
Intense, or Distinctive, and press
Select to preview the theme, or
select Save to save the theme
without a preview
3. To preview the theme, press ▲ or
▼ to scroll through the alarms and
beeps. Press Select to listen to each
alarm or beep. Continue until you
have decided which one to apply. To
exit, select Back
4. Highlight the desired theme and
select Save
Key Beep On / Off
The key beep on/off feature allows
you to turn on or off the audible beep
that accompanies each key press. This
feature does not turn off any audible
alarms associated with alarm or alert
conditions of the pump.
Note: If the key beep feature is turned
on, the key beeps will not sound while
any alarm screens are being displayed
or when entering a security code.
p. 34
Numeric Format
The numeric format setting allows
you to select the character or space
used to indicate the decimal point
and thousands units separators.
This will be determined by your
CADD
-Solis system administrator
®
when the protocol library is created.
Contact your CADD
administrator or see the Operator's
Manual for more information.

TIME AND DATE

The Change Time and Date setting
allows you to edit the time and date,
and to choose a time and date format.
The time and date options should
reflect the current time and date. The
clock is powered by a separate, internal
battery, which retains the time and
date even when the 4 AA batteries or
the battery pack is removed. The pump
uses this feature to record the time and
date of events in the delivery and event
logs, and in other reports. It is also
used to determine when delayed
starts and next dose start times begin,
and when preventative maintenance
alarms occur.
Note: The internal battery is
rechargeable and automatically
recharges when the pump is powered
on. If the pump is off for a long period
of time, it may not show the correct
time and date when it is powered on.
Check the time and date, and edit these
settings if necessary.
In the Tasks menu, press ▲ or ▼ to
highlight Change Time and Date and
press Select.
-Solis system
®
Clinician Guide