Table of Contents
Advertisement
BENQ Corporation
REMOTE CONTROL
There are 37 keys on the remote control:
1.POWER
3.Channel
Select
6.INPUT
9.CH (+)/(-)
11.SCAN
13.CH+/-
15.TV /
CATV
16.SLEEP
19.BACK
LIGHT
8.
/ / / (Cursor control) and ENTER:
: Use these Up/Down buttons to select items or settings and to adjust settings.
: Press these Right/Left buttons to adjust the OSD menu setting. And Press
or "Enter" sub menu setting.
Press this "ENTER" button to "Execute" the selection or "Enter" the sub menu you desire.
9. CH+and CH -:
Press these two buttons to change the TV channel.
10. VOL+ and VOL-
Press the Volume Up "+" or Down "-" button to increase or decrease the sound volume level.
11. SCAN:
Press this button to auto scan all channels that TV/CATV can provide.
12. MUTE: Press this button to silence the sound system. Press again to activate it.
13. CH+/-:
Press this button to add the current TV channel. Press again to erase the current TV channel.
14. MTS:
Press this button to choose different audio system. (Different TV systems have different selections.)
15. TV/CATV:
Press this button to choose the mode for TV and Cable TV systems.
16. SLEEP:
Press this button to set up the LCD TV auto turn off time.
17. FREEZE:
Press this button to freeze the screen (the video source still runs). Press again to exit this function.
18. ASPECT:
Press the button to adjust the image display screen format.
19. BACK LIGHT:
Press this button to adjust the LCD backlight brightness.
20. "I key"
Press this button to automatically and properly adjust the frequency, phase and Image position in PC mode and
automatically search the video source and properly display the video format in Video mode.
18
Remote control
1. POWER:
Press this button to turn on the TV set. Press again
to enter the standby mode.
2.INFORMATION
2. INFO:
Press this button to turn on the TV channel message
and any signal message (Including Video and PC).
Press again to turn off.
3. Channel Select:
4.Channel Return
Press these buttons to select the TV channel you
want to enter.
5.MENU
/
7.EXIT
4. CHRTN:
Press this button to jump between two channels.
8. / / /
(Cursor Control)
ENTER
5. MENU and MENU
10.VOL (+)/(-)
Press these two buttons to display the OSD menu
for adjusting the image, sound and functions and
choose the menu content from right or left page
12.MUTE
sequence.
14.MTS
17.FREEZE
6. INPUT:
18.ASPECT
Press this button to open the input source selection
20. Key (Auto Key)
menu or directly choose the input source.
7. EXIT:
Press this button to exit the controls of OSD menu
directly.
:
button as a "Select"; "Execute"
Advertisement
Table of Contents
