Table of Contents
Advertisement
BENQ Corporation
Aspect Controls
ASPECT
Advance menu (In Video Mode)
Mode
Explanation
Fill Screen
Any input signal scale to fit the 4:3 full screen.
Anamorphic
This mode is suitable for HDTV signal and DVD titles marked with "Squeeze" or
"Anamorphic". When playing this kind of DVD title, remember to set the TV type setting in
DVD player to 16:9 mode (wide screen). And use "Anamorphic" mode to present the movies
in correct aspect ratio and better image quality. It will lose a little information of both sides
and a little bit of the picture will be cropped from each side.
HDTV (4:3)
This mode is suitable for HDTV signals that directly translate 4:3 material to 16:9 format. This
kind of HDTV signal will have black areas on both sides. Use this mode to remove the black
area and present the 4:3 materials in full screen. This mode will cause more of the picture on
each side to be cropped and will cause a little loss of the 16:9 HDTV signal.
24
Function operation
1.
You can directly press "ASPECT" button on Remote Control as
illustrated to select the Image Aspect Ratio you prefer and the
screen display information appears as follows:
ASPECT
Setting the ASPECT on the MENU screen
1.
Press "MENU
Control or "Menu" button on Control Panel to select
"Advance
will appear as illustrated.
2.
Press
or to adjust it.
" or "MENU
" main menu page, then the main menu screen
or to select "Aspect Ratio" setting and press
" buttons on the Remote
Advertisement
Table of Contents
