Table of Contents
Advertisement
make sure that the temperature is not too high (not
over 37°C).
• Never move the bottle warmer during use or when
it still contains hot liquids.
• To disconnect the bottle warmer from the mains,
switch off the product by pressing and holding the
on/off touch button, then disconnect the power ca-
ble plug from the socket. Never pull on the power
cable or the device to unplug the appliance from
the mains socket.
• Check that the power cable plug is always un-
plugged from the mains socket and that the bottle
warmer is cold before moving it, cleaning it, storing
it, doing maintenance work or in between warming
cycles.
• The cleaning and maintenance of the product must
be carried out by the user and not by children and/
or people with reduced mental capabilities or lack-
ing experience or the required knowledge.
• Never immerse or wet the plug, bottle warmer or
power cable in water or other liquids.
• Do not attempt to open or repair the device. The
bottle warmer can only be opened with special
tools. The power cable must only be replaced with
another identical power cable to the one supplied
with the appliance; this operation must only be per-
formed by expert technicians or by Artsana S.p.A.
• The device is preset with the maximum bottle
warming time. It is important not to repeat the cycle
17
Advertisement
Table of Contents
