Configuring Gps With The Pq3198 (Verifying The Gps Status) - Hioki PW9005 Instruction Manual

Chapter 3 Configuring GPS with the PQ3198 (Verifying the GPS Status)
Configuring GPS with the PQ3198
(Verifying the GPS Status)
Use the device in combication with the PW3198 with the firmware version
1.07 or later installed. If the installed firmware is version 1.06 or earlier,
they will not operate properly.
GPS operation is configured with the PQ3198. GPS operation should be configured while
the PW9005 is connected to the PQ3198.
The following screen is used to make settings and view the device status while in
TING] mode.
[SYSTEM]
screen
[MAIN]
*
[HARDWARE]
To set the instrument to
If [RECORDING]:
Stop recording with the
then press the DATA RESET
If [ANALYZING]:
Press the DATA RESET
*: For the PW3198, press
[SETTING] mode:
START/STOP key and
key.
key.
key.
HIOKI PW9005A980-06
Chapter 3
11
3
[SET-