Hioki PW9005 Instruction Manual page 44

10
Chapter 2 Connecting the PW9005 to the PQ3198
3. Connecting the DC Power Supply Output Cable to the PQ3198
1
Connect the PW9005's DC power supply
output cable to the PQ3198's AC adapter
terminal.
Turn off the PQ3198 before connect-
ing the cable.
4. Connecting the Z1002 AC Adapter to the PW9005
1
Connect the power cord to the AC
adapter's inlet.
2
Connect the AC adapter's output
plug to the PW9005.
(Loop the AC adapter's cord through
the locking clamp to keep it from be-
coming disconnected.)
3
Connect the power cord's input
plug to an outlet.
• The PW9005 does not have a power switch. Since connecting the AC adapter
will turn on the device, be sure to connect the adapter last.
• Disconnect the AC adapter from the PW9005 to turn it off.
DC power supply
output cable
3
1
Z1002 AC Adapter
1. Open the locking clamp.
2. Pass the AC adapter's cord
through the locking clamp.
3. Close the locking clamp.
HIOKI PW9005A980-06
2