Connection Procedure - Hioki PW9005 Instruction Manual

2.2 Connection Procedure

Read "Operating Precautions" (p.3) carefully be-
fore connecting the GPS box.
"1. Connecting the GPS
See:
Antenna to the PW9005" (p.9)
"2. Connecting the RS-232C
See:
cable to the PW9005" (p.9)
"3. Connecting the DC Power Supply
See:
Output Cable to the PQ3198" (p.10)
"4. Connecting the Z1002 AC
See:
Adapter to the PW9005" (p.10)
1. Connecting the GPS Antenna to the PW9005
1
Align the groove on the BNC con-
nector on the GPS antenna with the
connector guide on the PW9005's
antenna terminal and insert.
2
Turn the connector clockwise to
lock it in place.
(To disconnect the connector, turn
it counterclockwise to unlock it and
then pull.)
2. Connecting the RS-232C cable to the PW9005
1
Connect
PQ3198's RS-232C interface with
the included RS-232C cable.
Turn off all devices before connect-
ing them. Failure to do so may
result in electric shock.
The PQ3198 may not detect the
PW9005 if it is connected with a cable
other than the included RS-232C cable.
Chapter 2 Connecting the PW9005 to the PQ3198
the PW9005 to
HIOKI PW9005A980-06
PQ3198 Power Quality Analyzer
4
3
4
GPS
1
Box
GPS antenna BNC connector groove
Antenna terminal con-
nector guide
the
2
2
1
2
RS-232C
cable
9
3