Hioki PW9005 Instruction Manual page 42

8
Chapter 2 Connecting the PW9005 to the PQ3198
2. Inspection after Turning on the Device
After connecting the AC adapter
p. 10
See:
• Is the PQ3198 on?
• Is the PQ3198 operating on AC
adapter power? (There is no
power switch on the GPS box. It
turns on when the AC adapter is
connected.)
After configuring the PQ3198
p. 11
See:
• Was the PW9005 detected? (The
[GPS] icon on the PQ3198's screen
should be a color other than red.)
The inspections are complete.
NO
YES
NO
YES
HIOKI PW9005A980-06
There may be a break in the power
cord or DC power supply output
cable, the AC adapter may be mal-
functioning, or the GPS box may
be malfunctioning.
Contact your HIOKI distributor.
The PQ3198 may not detect the
PW9005 if it is connected with a
cable other than the included RS-
232C cable.
If the PW9005 is not detected
despite being connected with the
included RS-232C cable, there
may be a break in the RS-232C
cable, or the device may be mal-
functioning.
Contact your HIOKI distributor.