Table of Contents
Advertisement
www.glp.de
Please read 'Vertical hanging safety information' on page 23 before linking fixtures
together.
Standing horizontally on a surface
The FS16Z fixture can stand horizontally on the floor or other stable, horizontal surface.
Figure 6. FS16Z standing horizontally (shown with glare shield installed)
To stand the FS16Z fixture horizontally:
1.
Install two FS16Z Tilt Brackets on the fixture as described in 'Attaching mounting
brackets to the fixture' on page 18.
2.
Loosen the handwheels on the brackets, adjust the brackets to a suitable angle as
shown in Figure 6 and tighten the handwheels.
3.
Place the fixture on the surface. Make sure that it is safe and secure, and that it will
not present a danger of tripping or falling.
For instructions on installing an FS16Z fixture standing vertically on a horizontal surface,
see 'Vertical installation standing on a surface' on page 26.
20
Installation
Fusion Stick FS16Z
User Manual Rev. A
Advertisement
Table of Contents
