Table of Contents
Advertisement
Quick Links
Installation & Operation Manual
V1008-WIR-180-1
V1000-WIR-360 Multi-Sensor Camera
XX304-40-01
Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or
that the operation will be entirely error free or perform precisely as described in the documentation. This system has not
been designed to be used in life-critical situations and must not be used for this purpose.
Document Number: 8009-8304-40-01 Product specifications subject to change without notice.
Issued: 8/2021 Copyright © 2021 Vicon Industries Inc. All rights reserved.
Vicon Industries Inc.
Tel: 631-952-2288) Fax: 631-951-2288
Toll Free: 800-645-9116
24-Hour Technical Support: 800-34-VICON
(800-348-4266) UK: 44/(0) 1489-566300
www.vicon-security.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vicon V1000-WIR-360
Summary of Contents for Vicon V1000-WIR-360
- Page 1 XX304-40-01 Vicon Industries Inc. Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or Tel: 631-952-2288) Fax: 631-951-2288 that the operation will be entirely error free or perform precisely as described in the documentation. This system has not Toll Free: 800-645-9116 been designed to be used in life-critical situations and must not be used for this purpose.
-
Page 2: Table Of Contents
Installing IP-FINDER Software ............16 Image - OSD ..................39 IP-FINDER ..................19 General Settings ................39 Introduction to the IP-FINDER User Interface ........20 Network - Basic ..................40 Button Functions ................20 IPv4 Settings ..................40 Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... - Page 3 Mount and Remove Network Storage ...........69 Video System .................54 Event - Relay Handler ................70 System - User Management ..............55 Relay Handler Configurations ............70 Admin Setting ................55 Event - SD Record .................71 Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
- Page 4 SD Information ................71 Alarm/Motion/Tampering/Video Analysis Settings ......73 Record Type Selected: Snapshot ............73 Alarm/Motion/Tampering/Video Analysis Settings ......74 Record Type Selected: Video ............74 Trigger Scheduled Settings .............75 Day/Time Inclusion Filter ..............75 Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
-
Page 5: Preface
▪ Follow all warnings and cautions in this manual. in any form or by any means without the prior written consent from Vicon ▪ Do not place the unit on an unstable surface, cart, or stand. -
Page 6: Rohs Compliance
(Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, Vicon has established an engineering and manufacturing task force to implement the introduction of green products. -
Page 7: Installation Recommendations
Technical Support and Assistance Ensure you have a stable, clean working environment. Dust and dirt can get 1. For the most updated information of Vicon products, visit Vicon’s website into components and cause a malfunction. Use containers to keep small at www.vicon-security.com. -
Page 8: Conventions Used In This Manual
This will prevent injury to yourself when performing a task. Caution: CAUTION! CAUTION! CAUTION! Information to avoid damaging components or losing data. Note: Provides additional information to complete a task easily. Copyright © 2021 Vicon Industries Inc. All Rights Reserved. V100-WIR-360 User Manual... -
Page 9: Package Contents
Preface Package Contents The V1020-WIR-180 package contains the following accessories: Name Quantity IP camera Grommet kit Quick installation guide Mounting accessory pack viii Copyright © 2021 Vicon Industries Inc. All Rights Reserved. V100-WIR-360 User Manual... -
Page 10: Chapter 1: Product Introduction
▪ Min. Object Distance: 3.28 ft (1 meter) Video and Audio ▪ Video compression: H.265/H.264/M-JPEG ▪ Video streaming: Triple streaming ▪ Frame rate: Up to 30fps at 20MP Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... - Page 11 ▪ PoE: IEEE 802.3at / IEEE 802.3bt PoE Class 5 (auto-detect depends on the power switch you use) General ▪ Power consumption: Max. 40 W ▪ Connectors: – Audio Line in*1, Line out*1 Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
-
Page 12: Removing The Protective Epe Foam And Preparing The Network Cables
Removing the Protective EPE Foam and Preparing the Network Cables 1. Loosen the 6 captive screws on the dome bubble using the torx tool 2. Remove the coil cord from the top cover. supplied and open it. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... - Page 13 3. Remove and discard the protective EPE from the lens modules. 4. Plug the coil cable back to the top cover. Then tighten the 6 captive screws on the top cover. (EPE) Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
-
Page 14: Hardware Installation (Wall Mount)
6. Rotate the cap to align from LOCK to OPEN to remove the cap. Hardware Installation (Wall/Pendant Mount 5. Loosen the captive screw on the side of the bottom cover. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... - Page 15 7. Rotate the cap to secure on the wall mount bracket. 8. Attach the safety harness on the camera mounting plate to the hook on the camera bottom. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
- Page 16 0-0 ~ 4 V DI (Alarm In) Trigger (High) 3.3 ~12 V V in (max) 30 V DO (Alarm Out) I out (max) 100 mA Wiring Diagram for Alarm Inputs/Outputs Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
- Page 17 Chapter 1: Product Introduction 11. Tighten the 3 captive screws on the camera to secure it. 12. Assemble camera with cap first. The should be aligned with OPEN Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
- Page 18 14. Tighten the captive screw on the lateral side of the bottom cover to secure the camera. mark should be aligned with the LOCK ( ) mark. Conduit Entrance Note default head position of camera for 360⁰ view. Vicon Logo Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
- Page 19 2. Remove the 4 screws on the plate to remove plate from the mounting a hole on the mark to allow the screw on the camera to pass through cap. the drilled hole. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
- Page 20 3. Use the supplied expansion bolts (anchors) and screws to secure plate 4. Attach the safety harness on the camera mounting plate to the hook on onto the ceiling. the camera bottom. Positioning Label Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
- Page 21 (there is only 1 screw hole on the plate) 7. Refer to Step 10 in Wall/Pendant installation for details on preparing the cable. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
- Page 22 Chapter 1: Product Introduction 8. Twist the camera counterclockwise until it is secure and can’t move. Then tighten the screw to secure camera on ceiling. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
-
Page 23: Chapter 2: Camera Configuration
3. Once unzipped, double click on the setup file to start the installation The following information outlines the instructions for each method. program. 4. Click the Next button on the welcome screen to continue. Next button Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... - Page 24 6. To check the available drives you can install the software to and their available and required disk space, please click on the Disk Cost button. User accounts 8. Click on the Next button to continue. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
- Page 25 9. Click on the Next button to begin installation. 10. Once the installation process is complete, click on the Close button to finish. A shortcut will be created on the desktop. Next button Close button Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
-
Page 26: Ip-Finder
2. When the program is launched, it will begin searching the network for IP cameras automatically (the search will last for up to 90 seconds). You can also manually search cameras by clicking on the Search button. Camera List Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 27: Introduction To The Ip-Finder User Interface
Device Mark IP” and “Firmware Upgrade” functions. NOTE: Different IP camera models use different firmwares, please do NOT update the firmware of different models using the same firmware. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 28: Web Browser
Note: The recommended browsers to use are Internet Explorer, Safari, Firefox and Chrome. However, Chrome only supports the viewing of the web Setup menu; Live View ADMIN the video stream is not supported. 1234 Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 29: Main Screen Overview
“Admins” indicates administrator account and “User” indicates user account. Function Bar Logs out from the current login session. Full Up Panel/Full Down Panel. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 30: Configuring The Camera's Setting
Chapter 2: Camera Configuration Configuring the Camera’s Setting 1. To configure the camera’s setting, click on the Setup button on the main screen to enter the configuration menu. Setup Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 31: Browsing Through The Configuration Menu
▪ Network – Network Storage – Basic – Relay Handler – FTP – SD Record – SSL – 802.1x – SNMP – Firewall – LDAP – DDNS – RTSP Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 32: Video - Video Configuration
0 is selected. GOP Length Configures the GOP length of the stream; the range is 1~120. Users can enter the value or adjust it through the slider bar. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 33: Secondary Stream
Bit Rate Configures the bit rate, the range is 64~4000. User can enter the value or adjust it through the slider bar. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 34: Third Stream
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 35: Audio Settings
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 36: Image - Exposure
Disable Global Mode (OFF) Set up the parameters for each image channel independently. Each image channel can be adjusted individually. After setting up the parameters, press Save to keep the configurations. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... - Page 37 Select User Define to enter the value of Maximum Gain (the range is 1~512) manually. Gain The range is 1~512. It can only be edited when Lock is selected as the AE Mode. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
- Page 38 The other available options are 1, 2, 3 and 4. White balance can also be set manually through RG Gain or BG Gain; the range is 0.00-10.00. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
-
Page 39: Day/Night Settings
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 40: Image - Basic Settings
Configures the brightness of the image; the range is 0 ~ 100, with 0 being the lowest brightness. Enter the values or adjust the bar to increase or decrease the values. The default value is 50. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... - Page 41 Discards all the settings applied to the image and resets to the default settings. Restore All Image Settings Discards all the settings applied to the image and reverts to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
-
Page 42: Image - Ptz
4 into a position where they are all directly adjacent to each other.) Then move each module to adjust tilt and zoom to achieve desired field of view for the preset. Then select Save Preset. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 43: Image - Roi
5. Press the Set Area button for the setting to take effect. The ROI area will then be seen on the video stream. 6. Press the Del Area button or select OFF to delete the ROI area. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 44: Image - Privacy Zone
Mask will be seen on the video stream. 4. Press the Del Area button or select OFF to delete the privacy zone. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 45: Image - Osd
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 46: Network - Basic
Configures the HTTP port number of the web configuration menu. HTTPS Port Configures the HTTPS port number of the web configuration menu. Hardware Address Unique MAC address for each camera device. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 47: Network - Basic
Save button to apply the configuration;, click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 48: Network - Ftp
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 49: Network - Ssl
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 50: Network - 802.1X
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 51: Network - Snmp
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 52: Network - Firewall
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 53: Network - Ldap
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 54: Network - Ddns
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 55: Network - Rtsp
Default URL Path of Stream 1 to Stream 3 Stream 1: rtsp://cameraIP/stream1 Stream 2: rtsp://cameraIP/stream2 Stream 3: rtsp://cameraIP/stream3 Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 56: Multicast (Stream 1 To Stream 3)
Configures the port number of the audio stream. Meta IP Configures the multicast address for the html meta. Meta Port Configures the port number of the html meta. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... - Page 57 Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
-
Page 58: System - Date/Time
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 59: System - Maintenance
Records all the status information of the camera in list format when the camera is connecting to the PC. Downloads the log file to the computer as a text file. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 60: Backup
Update and Restore button to restore camera settings. Video System Switch Video System Select the desired video system type. Note: Switching the video system type will cause the camera to restart and reset to default. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 61: System - User Management
User Information. Press Cancel to delete the new user if you do not want to continue the setup. To delete an account, press the Del User button. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 62: User Information
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 63: Event - Alarm Handler
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Close Press to leave this schedule setting page. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 64: Event - Motion Detection
3. Repeat the above steps to create motion areas for zones 2 to 5. To delete an area, find the motion zone number you would like to remove, and press the Del Area button. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 65: Motion Schedule Settings
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Close Press to leave this schedule setting page. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 66: Event - Tampering Alarm
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Close Press to leave this schedule setting page. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 67: Event - Video Analysis
A total of 4 anchor points can be created. Select the Inside or Outside option (calculation method) from the Direction drop-down menu. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... - Page 68 Inside for Area Counting: Objects leaving from inside the zone area to the outside will be calculated as Inside. Objects entering from outside the zone area to the inside will not be counted as Inside or Outside. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
-
Page 69: Setup Detection Area
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 70: Analysis Schedule Settings
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Close Press to leave this schedule setting page. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 71: Event - Ftp Upload
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 72: Event - Smtp Notification
▪ Trigger Video Analysis Message Specifies the message content. Subject Specifies the subject of the message. Attach JPEG Snapshot Enables or disables email delivery of trigger event snapshots. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 73: Smtp Server
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 74: Event - Network Storage
Specifies the IP address of the network storage server. Share Specifies the shared folder name on the network storage server. Record Type Specifies the event trigger action. The options are Snapshot and Video. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 75: Login Certificate
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 76: Event - Relay Handler
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 77: Event - Sd Record
Displays whether an SD card is installed or not. If an SD card is detected, ok will be displayed; if an SD card is not detected (or a faulty SD card is used), not_mounted will be displayed. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... - Page 78 Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual...
-
Page 79: Alarm/Motion/Tampering/Video Analysis Settings
Configures a folder name on the SD card. The default folder names for Alarm, Motion, Tampering Detection and Video Analysis are Alarm, Motion, Tampering and Video Analysis, respectively. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 80: Alarm/Motion/Tampering/Video Analysis Settings
Configures a folder name on the SD card. The default folder names for Alarm, Motion, Tampering Detection and Video Analysis are Alarm, Motion, Tampering and Video Analysis, respectively. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... -
Page 81: Trigger Scheduled Settings
Save button to apply the configurations; click on this button once and all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings and revert to the previous settings. Copyright © 2021 Vicon Industires Inc. All Rights Reserved. V1000-WIR-360 User Manual... - Page 82 VICON INDUSTRIES INC. For office locations, visit the website: www.vicon-security.com...
Need help?
Do you have a question about the V1000-WIR-360 and is the answer not in the manual?
Questions and answers