Everybot THREE SPIN TS300 User Manual page 5

Do not lie down near the product while it is cleaning.
▶
• Long hair can get tangled around mops and
rotating plates.
Do not touch rotating plates or mop pads while the
▶
product is in operation.
Do not place objects on the product or apply strong
▶
force over it.
Be careful not to get hair, fingers, towels, and
▶
wires caught on the rotating plate on the bottom
of the product.
If the product is caught on the threshold of a door
▶
during cleaning and it cannot drive, pick up and
relocate the product and start cleaning again.
▶
Do not use the product on a floor with a slope of
more than ��°.
If the product emits a strange sound, smell, or
▶
smoke, turn off the power immediately and
contact the service center.
After Use
When cleaning the product, do not spray it directly
▶
with water to clean it or wipe it with volatile
substances such as benzene, thinner, or alcohol.
Do not remove foreign matters by inserting
▶
wooden or metal sticks into the product.
Remove mop pads after use and wash them
▶
immediately. If a wet mop is left on the floor for
an extended period, it may soil or discolor the floor,
and the mop may develop a bad odor.
Boiling mop pads or washing them with bleach
▶
or fabric softener may damage them.
Do not wash the water tank with non-neutral
▶
detergent, vinegar, baking soda, or groundwater.
It may cause damage to the water tank or product.
After washing the water tank and mop pads with
▶
water, dry them completely.
Residual moisture can cause an odor.
• Use mop pads after drying them completely
in sunlight.
For safety, make sure the front sensor is always
▶
clean.
Store the product indoors between �℃ and ��℃.
▶
Never disassemble or modify the product unless
▶
you are a qualified repair technician.
Battery Issues
When replacing the battery, use a genuine battery.
▶
Table of Contents
Quick Guide
Important Safety Instructions
Components
Names of Parts
Battery Charging
Attaching Mop Pads
Installing the Water Tank
Start Cleaning
Using the Remote Control
Cleaning the Unit
Things to Check Before
Reporting a Breakdown
Product Specification
Product Warranty
Do not disassemble or modify the battery.
▶
Do not throw the battery into fire or heat it.
▶
Do not insert metallic substances into the
▶
charging point (+,-).
With more use of the battery, the duration of
▶
operation may become shorter.
This means that the battery has reached the end
of their lifespan and require replacement.
Please contact the service center.
When the battery leaks, be careful not to contact
▶
it with your skin or eyes.
The battery is exclusively intended for this product.
▶
Do not use it for other home appliances or other
purposes.
Store the product indoors between �℃ and ��℃.
▶
If there is a problem with the battery, do not
▶
disassemble them yourself.
Please contact the service center.
When replacing the battery, contact the service
▶
center.
• Using a non-genuine battery may cause malfunction.
Before disposing of the device, remove the battery
▶
from the device and discard it safely in accordance
with local disposal regulations.
Turn off the device before removing the battery.
▶
�
�
�
�
�
�
��
��
��
��
��
��
��
5