Everybot THREE SPIN TS300 User Manual page 3

Start Cleaning
Cleaning the Unit
• Remove the mop pad from the
rotating plate.
• Gently rub the mop pad with
neutral detergent to wash and dry.
• If there is dust or foreign matter on the sensor, it may interrupt the detection sensor.
Please wipe the sensors gently with a soft cloth on a regular basis.
2
sec
Turn on the power
• Press and hold
the power/operate button
to turn on the power.
• Detach the water tank from the
main unit.
• Use neutral detergent to wash
and dry completely.
Side detection
Cliff detection
Front detection
2
Click
sec
Start cleaning
• Press the power/operate
button once more to start
automatic cleaning.
• Periodically clean the water tank
joint to prevent foreign matter
from entering.
sensor
sensor
sensor
Click
Rear detection
sensor
3