Everybot EDGE Quick Manual
Hide thumbs
Also See for EDGE:
- User manual (16 pages) ,
- Quick start manual (24 pages) ,
- Quick manual (2 pages)
Advertisement
Quick Links
Maintaining Water Supply Mop Kits
This is Not a Malfunction. Please Check.
LED lamp is OFF
LED OFF
LED ON
Sound alarm while its operation.
Blue Blinks
1
Separate the mop from the water tank
mop kit a er finished operating.
·
Please just pull out the water tank mop
kit by hands.
·
If it is hard to pull out, please twist it
a little bit.
2
Open the rubber cap to dry out inside
of water tank a er pour remained
water.
·
If the machine does not work for 5min.
It automatically power o together with
LED lamp.
·
If you press a operation button for
2sec. LED lamp will be turned on with
power on status.
·
A er 50minute cleaning, the main unit
sounds the alarm to change mops and
fill water in the water supply mop kit.
·
For the better cleaning, replace with
new mops and fill water a er charging.
Ver 1.0 Copyright © 2019 Everybot Inc. All rights reserved
EDGE
QUICK GUIDE
Please carefully review this guide before using the product
www.everybotweb.com
Components
Main Unit
Water Supply Mop Kit
Mother Yarn Mops: Grey
Remote Control:
Power Adaptor
with Battery
·
Mother yarn mop (grey color)
Note
It is included with mother yarn which is 100 times
thicker than microfiber. Thus, it is good for cleaning
up dust in cracks and stains.
Microfiber Mops: Green
Silicon Brush
·
Microfiber yarn mop (green color)
It is a mop with richer and longer yarns so it has
superior wiping performance.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Everybot EDGE
Summary of Contents for Everybot EDGE
- Page 1 Ver 1.0 Copyright © 2019 Everybot Inc. All rights reserved Maintaining Water Supply Mop Kits Separate the mop from the water tank EDGE mop kit a er finished operating. QUICK GUIDE · Please just pull out the water tank mop kit by hands.
- Page 2 · Do not use any other power adapter other than the adapter which came with the unit. Auto Cleaning Edge Cleaning Focus Cleaning Intensive Cleaning Yellow LED Blinks Blue LED Blinks LED is OFF...
Need help?
Do you have a question about the EDGE and is the answer not in the manual?
Questions and answers
Mop turn on(blue light lit) second time pressing it, starts blinking yelllow light and makes a sound like is “dying”. Battery fully charged.
When the Everybot EDGE mop blinks a yellow light and makes a sound after the second press, despite being fully charged, it indicates that the unit is stopped by obstacles or there are foreign substances in the mop, yellow guide kit, or water supply mop kit.
This answer is automatically generated