Everybot THREE SPIN TS300 User Manual page 11

Start Cleaning
• If there is no operation for � minutes, the power turns off.
Caution
You can check the current status of the product through the main unit's LED indicator.
Note
Battery level
indicator
Battery status notification
• When the battery is low during operation,
the low LED flashes and the power/operate
button turns yellow.
• Please operate after charging.
Sufficient
Moderate
Low
Error notification
• In case of battery and charging errors,
the power/operate button will blink in red.
• If an error occurs during the product operation,
the power/operate will blink in yellow.
• Please turn the power off and on, then check
again.
Turn on power | Start cleaning
Press and hold the power/operate
button to turn on the power.
Press the power/operate button once
more to start automatic cleaning.
2 2
sec sec
Turn on
the power
Stop cleaning | Turn off power
Press the power/operate button
in the middle of cleaning to stop
cleaning. Press and hold the
power/operate button while cleaning
is stopped to turn off the power.
Power/operate
button
Click Click
Start
cleaning
11