Table of Contents
Advertisement
Description of the device
The FLOW 32 meter is based on measurement principle by a well-known Faraday's
electromagnetic induction law according to which an electric voltage is induced during the
flow of a conductive liquid through the flow meter magnetic field. This is picked up by two
electrodes in direct contact with the measured medium and evaluated in the electronic unit.
The FLOW 32 induction meter is suitable exclusively for measurement of volumetric flow of
electrically conductive liquid substances with a minimum conductivity of 20 S/cm.
The meters are designed for flow measurement within the corresponding range according to
individual sizes, whereas it holds true that the higher velocity of the liquid flowing through
the meter the higher measurement accuracy.
Scope of delivery
Accessories vary according to the variant of flow sensor and above standard optional features.
Threaded connection design
The electronic evaluation unit is incorporated right in the flow meter section in order to form
its integral part, the respective flow rate sensor (grounding electrodes are formed by threaded
connection), installation instructions.
Hose nipple connection design
The electronic evaluation unit is incorporated right in the flow meter section in order to form
its integral part, the respective flow rate sensor (grounding electrodes are made up of screw
joints), hose nipples for threaded connection, installation instructions.
Storage conditions
The temperature during transportation and storage of the meter must be within the range of -
10 °C up to 50 °C.
Warranty
Unprofessional installation or using the induction meters (devices) may result in a loss of
warranty as well as failure to comply with installation or operating conditions according to
this manual.
In case of returning the meters for inspection or repair to the COMAC CAL s.r.o. factory,
enclose please the completed form, see the last page of this manual. Without having one, we
will not be able to handle your requirement for modification or possibly repair your meter
correctly and promptly.
FLOW 32 manual
Page 3 (total 18)
COMAC CAL s.r.o.
Advertisement
Table of Contents
Need help?
Do you have a question about the FLOW 32 and is the answer not in the manual?