COMAC CAL FLOW 32 Installation And Technical Conditions page 12

Basic parameter settings
The parameters of the meter or those of the flow meter are set by the manufacturer according
to order and basic data are indicated on the flow meter.
Safety rules for operator
Any interventions in the inductive flow sensor and evaluation unit itself are illegal on the part
of operator and they may lead to direct scalding by medium. Perform electrical connection
always after powering off. In case of a high temperature of the medium, the flow meter itself
can be heated up so you must be careful and avoid contacting the device.
FLOW 32 manual Page 12 (total 18) COMAC CAL s.r.o.