Vitek VT-3628 Manual Instruction page 7

•
Mince the meat thrice, mince nutmeg, and
mix the components.
•
More meat and less flour in a casing provide
better consistency and taste of the prepared
dish.
•
Fill the rolls, clamp at edges, and shape as
you wish.
•
Deep fry the rolls.
MEAT GRINDER CARE
•
After finishing operation, switch the meat
grinder off by setting the switch (7) to the
position «0», and unplug the unit.
•
Press the release button (5), turn the meat
grinder head clockwise and remove it.
• Unscrew the nut (12) and remove the plates
(10 or 11) and the crossed blade (9) from the
screw (8).
• Remove the screw (8) from the meat grinder
head (3).
• Remove remains of food from the screw (8).
• Wash the removable parts of the meat grinder
(1, 2, 3, 8, 9, 10 or 11, 12, 13, 14) with warm
water and neutral detergent, rinse and dry
them thoroughly before assembling.
•
Clean the meat grinder body (6) with a slightly
damp cloth and then wipe the body dry.
•
Do not use solvents or abrasives to clean the
meat grinder body (6).
•
Provide that no liquid gets inside the meat
grinder body.
•
Oil the plates (10, 11) and the blade (9) with
vegetable oil before taking the dried accesso-
ries away for storage – this will protect them
from oxidation.
STORAGE
•
Before taking the meat grinder away for stor-
age, make sure that the meat grinder body
and all removable parts are clean and dry.
•
Keep the unit in a dry cool place out of reach
of children and disabled persons.
DELIVERY SET
Meat grinder – 1 pc.
Pusher – 1 pc.
Food tray – 1 pc.
Plates – 2 pcs.
Sausage filling attachment – 1 pc.
«Kebbe» attachments set – 1 pc.
Instruction manual – 1 pc.
IM VT-3628.indd 7
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Rated input power: 500 W
Maximum power: 2000 W
RECYCLING
For environment protection do not throw out
the unit and the batteries (if included), do not
discard the unit and the batteries with usual
household waste after the service life expira-
tion; apply to specialized centers for further
recycling.
The waste generated during the disposal of the
unit is subject to mandatory collection and con-
sequent disposal in the prescribed manner.
For further information about recycling of this
product apply to a local municipal administration,
a disposal service or to the shop where you pur-
chased this product.
The manufacturer preserves the right to
change design, structure and specifications
not affecting general principles of the unit oper-
ation without a preliminary notification due to
which insignificant differences between the
manual and product may be observed. If the
user reveals such differences, please report
them via e-mail info@vitek.ru for receipt of an
updated manual.
The unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.
7
ENGLISH
22.08.2018 12:57:06