Table of Contents
Advertisement
Always turn the tool off properly and disconnect it from its power source before making any
adjustments or changing accessories.
Getting Started
Always ensure that the supply voltage conforms to the voltage indicated on the nameplate of
the tool.
Familiarise yourself with all the instructions and information contained within this operation
manual as well as the tool itself before using it for the first time. It is recommended to perform
test cuts in order to get used to the tool before beginning work on an actual project.
Use suitable detectors to find hidden utility lines or call the local utility company for assistance
(contact with electric lines can lead to fire or electrical shock; damaging a gas line can result in
an explosion; penetrating a water pipe will cause property damage and may lead to electrical
shock).
Do not work materials containing asbestos as the dust released by doing so is considered to
be highly carcinogenic.
Dust from material such as paint containing lead, some types of wood, minerals and metal
may be harmful. Contact with or inhalation of the dust may cause allergic reactions and/or res -
piratory diseases to the operator or individuals within the vicinity. Wear a dust mask and use a
dust extraction device whenever possible.
Follow the dust-related national requirements for the materials you want to work with.
Do under no circumstances attempt to clamp the tool in a vice.
After use
Always make sure to let the moving parts of the tool come to a complete halt before placing it any-
where. Never attempt to forcefully stop the rotation of the accessory.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Article 62850
Page 7
02
2021-1
Advertisement
Table of Contents
