Safety Instructions - WilTec 62850 Operation Manual

Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in -
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.

Safety Instructions

General Safety Instructions
Warning! Keep this manual safe and make sure it is accessible at all times. This operation manual
contains important information concerning the safety, operation, maintenance and storage of this prod-
uct. Carefully read all the information and familiarise yourself with the device before using it as the use
of the device might otherwise cause property damage as well as severe injuries and may even lead to
death.
Work Area Safety

Always keep your working area clean and well-lit. Cluttered or insufficiently lit working areas
increase the risk of accident.

Do not operate the device in explosive environments or in the vicinity of flammable sub-
stances, liquids, gases or dusts. The use of this device may create sparks that could poten-
tially ignite gases or dust.

Keep bystanders away from the working area while operating the device as distractions may
lead to a loss of control.
Electrical Safety

The power plug of the device has to match the power socket and must not be altered in any
way. Matching sockets and original plugs minimise the risk of electric shock.

Do under no circumstances attempt to modify the device, its accessories or its power plug.
Modified devices are dangerous and their use carries a great risk of accidents and electric
shock.

Do not use adapter plugs with earthed power tools.

Avoid physical contact with earthed objects and surfaces such as pipes, stoves or refrigerat-
ors. An earthed body increases the risk of electric shock, when working with a power tool.

Keep this tool safe from moisture, rain as well as other sources of water. Water permeating
the device will damage it and greatly increase the risk of electric shock.

Do not pull at the power cord of the device and do not abuse it to lift, carry or hold the device.

Do not expose the power cord to heat, oil, sharp edges or moving parts and make sure it is
not bent or pinched. Damaged or entangled cables greatly increase the risk of electric shock.

Always check the cable for signs of damage or wear before using the device. Do not use the
tool if its power cord or plug are damaged and make sure to have it replaced by a qualified
electrician before the device is operated again.

Damaged or worn cables must not be repaired and have to instead be replaced by a qualified
electrician.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Article 62850 Page 3
02 2021-1