Table of Contents
Advertisement
Supported Controllers
The following AD-UTC controllers are compatible with SpeedDome Ultra VII:
Controller
ADCC0200
ADCC0300
This list of controllers is complete as of the time of publication. Other controllers may be supported.
Contact your Sales Representative for current information.
Performance Notes
The following considerations should be made when using the SpeedDome Ultra VII Day/Night
camera dome in the AD-UTC environment.
Address Setting
The SpeedDome Ultra VII camera dome must be set to address 891 to operate in the AD-UTC
environment. When the dome initializes or resets, the address and protocol information (UTC_T)
appear on-screen.
Accessing the Quick Set Menu
The Quick Set Menu provides easy access to certain SpeedDome Ultra VII Day/Night functions from
the keyboard. Two pages of settings are available. To access the Quick Set menu, select the dome,
and press
Figure E-1: Quick Set Menu
0
1
2
3
4
10
11
12
13
14
FOCUS FAR = next page
Enter a number and press
between pages. The following table describes the options.
E–4
Presets
96
96
(Quick Set button).
TOGGLE QUICK SET MENU
DOME CONFIG MENU
AUTO IRIS/AUTO FOCUS
FLIP
PEEL PATTERN
NIGHT MODE
DAY MODE
AUTO DAY/NIGHT MODE
WDR ON
WDR OFF
to use a quick set function. Press Focus Far or Focus Near to scroll
Patterns
Quick Set Menu
3
3
15
SMOOTH SCAN
16
STEPPED SCAN
17
RANDOM SCAN
20
DOME INFORMATION
FOCUS NEAR = previous page
SpeedDome Ultra VII Day/Night Operator's Manual
Yes
Yes
Advertisement
Table of Contents
