Intended Use - Danfoss VLT FC Series Instructions Manual

1.1.1 Intended Use

The purpose of this document is to go over the integration of a FC Drive and EtherNet/IP Option Card, MCA 121 into the Logix5000
control Systems (ControlLogix, CompactLogix, FlexLogix). To do this we will go over how to use the Danfoss supplied Add-On
Instructions (AOIs). The AOI provides an easy programming task for the end-user. For an example program open the provided
sample program "EthIP.acd". Note that when using this version of the AOI, version 20.0 or later of RSLogix 5000. Earlier versions of
RSLogix do not support the Danfoss EDS file, and will require additional setup of the module configuration.
1.1.2 AOI Features
•
Easy handling of FC series drive
•
Motor can be started with a single bit
•
Speed reference as real value in percentage
•
Actual speed of the motor in percentage
•
Direct information if Warning or Alarm is present
•
Motor current as readout in Amps directly
•
If drive is prohibit the start of the motor, it is shown directly
2
®
VLT MCA 121 EtherNet/IP Add On Instruction
®
MIxxxxxx - VLT is a registered Danfoss trademark