Safety Precautions - Ultratec Eclipse G3000 Operator's Manual

Safety Precautions

G !!
W A R N IN
1. Ensure that any operation of the machine is supervised by suitably trained and authorized personnel.
2. Do not modify the machine or use a machine which has been damaged in any way.
3. Allow sufficient air circulation around the machine at all times.
4. Protect the machine from direct weather effects and wet locations.
5. Only use fluids manufactured by Ultratec Special Effects.
6. Do not continue to produce fog when visibility is reduced to 20" 50cm or below.
7. Avoid directing fog output continuously at people, structures or objects within close proximity of the
discharge nozzle.
8. Ensure that adequate exhausting arrangements are available in the event of an emergency.
9. Do not place hands or exposed skin within the first 20" (50 cm) of the discharge nozzle at any time
during fog production.
10. Fog effects will trigger smoke alarms and detectors. Please take suitable precautions to prevent
false alarms.
11. Ensure sufficient air exchange vs. CO2 released.
CO2 is heavier than air and will pool in higher concentrations in lower lying areas like orchestra
pits and below stage.
www.ultratecfx.com
2