Introduction; Water Base Fog Technology; Eclipse Low Fog Technology; Warning - Ultratec Eclipse G3000 Operator's Manual

Introduction

Water Base Fog Technology

Water Base Fog Technology is achieved by pumping a glycol/water mixture through a heat exchanger. This will
vaporize the fluid as it passes through the processing block. The vaporization of the fluids force the hot mixture
through the output nozzle. When mixed with ambient air, it forms an opaque aerosol (fog). The fog is made up of
tiny droplets that form around the small particles in the air. The suspended droplets refract the light, allowing the
fog to take on the color of the light illuminating it.

Eclipse Low Fog Technology

The advanced Eclipse technology uses liquid CO2 to cool the fog, generating a consistent effect at sub zero
temperatures. This process enables you to produce large quantities of low lying fog on a continuous basis without
cue time limitations or the messy water residue associated with other technologies. The Eclipse is compact
and mobile facilitating most applications.
The unique partnering of a fog effect with liquid CO2 is cost effective while providing a longer lasting effect.
Designed to be utilized with the Eclipse, the Ultratec Special Effects genuine 'Molecular Fog Fluid' provides
a dry, thick, white effect with a consistent dissipation that eliminates any ambient hazing. The "Eclipse"
couples with the G3000, offering the most advanced controls and fog output available. The Eclipse consumes
approximately 8 lbs. of Liquid Carbon Dioxide per minute of operation.
The system can be controlled via the attached fog machines integral controls, DMX or show control.
The Eclipse Interface allows the Eclipse & Fog Machine to be controlled on separate DMX channels. Standard
equipment includes 10" ducting sleeve to facilitate standard ducting in many configurations based on fog distribution
requirements.

Warning!!

G !!
W A R N IN
High pressure gas/liquid. Safety Hazard!
Refrigerated liquids at low temperature. Burn Hazard!
High Temperature contact points on fog machine nozzle. Burn Hazard!
Condensed fluid accumulation. Slip Hazard!

Important Safety Instructions

G !!
W A R N IN
1. Do not remove the outer case.
2. Persons suffering from asthma or allergenic sensitivity may experience irritation, discomfort or allergic
symptoms when exposed to fog effects.
3. Ensure that this unit is grounded at all times. Failure to do so may result in serious injury.
4. Use Ultratec Special Effects fluid ONLY.
1
www.ultratecfx.com