Introduction; Warning; Safety Precautions - Ultratec G3000 Mega Fog Burst Operator's Manual

Introduction

Create a Large Fog Burst with a G3000, the Mega Fog Burst attachment is controlled by the Standard On-
Board DMX controls and the Auxiliary AC outlet on the rear of the machine. This complete package allows for
amazing control while offering similar effects to Cryogenics from a fraction of the operational costs.
***G3000 Fog Machine sold separately

Warning!!

G !!
W A R N IN
Important Safety Instructions:
G !!
W A R N IN
1. Do not touch, place hands or expose skin within 20"(50cm) of the discharge nozzle.
2. Do not remove the outer case.
3. Persons suffering from asthma or allergenic sensitivity may experience irritation, discomfort or
allergic symptoms when exposed to fog effects.
4. Ensure that this unit is grounded at all times. Failure to do so may result in serious injury.
5. Use Ultratec Special Effects fluids only.
SDS is available at www.ultratecfx.com

Safety Precautions

G !!
W A R N IN
1. Ensure that any operation of the machine is supervised by suitably trained and authorized personnel.
2. Do not modify the machine or use a machine which has been damaged in any way.
3. Allow sufficient air circulation around the machine at all times.
4. Protect the machine from direct weather effects and wet locations. Suitable for dry locations only.
5. Only use fog fluid by Ultratec Special Effects.
6. Do not continue to produce fog in an enclosed area when visibility is reduced below 20"(50cm).
7. Avoid direct fog output continuously at persons, structures or objects within close proximity of
the discharge nozzle.
8. Ensure that adequate exhausting arrangements are available in the event of an emergency.
9. Do not place hands or exposed skin within the first 20"(50cm) of the discharge nozzle at any
time during fog production.
10. Fog effects can trigger smoke alarms and detectors. Please take suitable precautions to
prevent false alarms.
1
www.ultratecfx.com