Jumper Setup - ASROCK C621A WS Manual

2.6 Jumper Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is "Short". If no jumper cap is placed on the pins, the jumper
is "Open". The illustration shows a 3-pin jumper whose pin1 and pin2 are "Short"
when a jumper cap is placed on these 2 pins.
MiniSAS HD SATA/PCIE
Selection Jumper
(3-pin MINISAS_1)
(see p.1, No. 40)
CPU PECI Mode Jumper
(3-pin PECI1)
(see p.1, No. 48)
Security Override Jumper
(3-pin SEC_OR1)
(see p.1, No. 33)
ME Recovery Jumper
(3-pin ME_RECOVERY1)
(see p.1, No. 49)
Password Reset Jumper
(3-pin PASSWORD_
CLEAR)
(see p.1, No. 51)
SATA (Default)
CPU PECI connected to
PCH
Descriptor Security
Override
Normal Mode (Default)
Normal Mode (Default)
PCIE
CPU PECI connected to
BMC (Default)
Not override (Default)
ME Recovery Mode
Password Clear
C621A WS
25