Table of Contents
Advertisement
Available languages
Available languages
BIOS Recovery Jumper
(3-pin BIOS_RECOVERY1)
(see p.1, No. 45)
ESPI/LPC Selection Jumper
(3-pin ESPI_LPC_SEL1)
(see p.1, No. 54)
ESPI Flash Sharing Jumper
(3-pin ESPI_SHARE)
(see p.1, No. 42)
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is "Short". If no jumper cap is placed on the pins, the jumper is
"Open".
BIOS Swap Override
Jumper
(ESPI_MODE1)
(see p.1, No. 52)
26
Normal Mode (Default)
ESPI (Default)
Master ESPI Flash Sharing
(Default)
2-pin Jumper
Recover BIOS
LPC
Slave ESPI Flash Sharing
Open: Disable Override (Default)
Short:
Enable Override
Advertisement
Table of Contents
