ASROCK C621A WS Manual page 39

C B A
C B A
C B A
C B A
C
NUT2
For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for
details: http://www.asrock.com
20
o
NUT1
Step 3
Move the standoff based on the
module type and length.
Skip Step 3 and 4 and go straight
to Step 5 if you are going to use the
default nut.
Otherwise, release the standoff by
hand.
Step 4
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
Step 5
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot. Please be aware that the M.2
(NGFF) SSD module only fits in one
orientation.
Step 6
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw as
this might damage the module.
C621A WS
37