Unit Identification Purpose Led/Switch - ASROCK C621A WS Manual

2.8 Unit Identification purpose LED/Switch

With the UID button, You are able to locate the server you're working on from behind
a rack of servers.
Unit Identification
purpose LED/Switch
(UID1)
(see p.6, No. 9)
2.9 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and listed
on the support CD driver page. Please follow the order from top to bottom to install
those required drivers. Therefore, the drivers you install can work properly.
When the UID button on the
front or rear panel is pressed,
the front/rear UID blue LED
indicator will be truned on.
Press the UID button again to
turn off the indicator.
C621A WS
35