Replacing The Battery Pack - Canon BJC-50 User Manual

Replacing the battery pack

Follow this procedure to replace the battery pack.
You can replace the battery pack at any time. You may want to purchase and carry extra battery packs
for emergencies. However, please remember that new battery packs must be fully charged before you
can use them. Before you travel, make sure new battery packs are fully charged.
You must also replace a battery pack after it is exhausted. The
and the printer will beep six times when the battery pack becomes exhausted. After the battery pack is
exhausted, ti cannot be recharged and used again.
HANDLE THE BATTERY PACK CAREFULLY BY FOLLOWING THE GUIDELINES
DESCRIBED ON PAGE 21.
1. POWER
Press the
2.
If the optional sheet feeder is installed on the printer, remove it.
3. If the front cover is closed, open it.
4.
Push the battery pack release to the right. The battery pack will spring slightly out of the printer.
5.
Remove the battery pack from the printer.
button to switch the printer off.
CHARGE/ERROR
64
lamp will flash
64