Canon BJC-50 User Manual page 36

.
Slide the paper guide all the way to the right, and align the long side of the sheet with the left side
4.
of the feed slot. Slide the paper guide left to the right edge of the sheet until it is snug (not too
tight).
Insert the sheet straight into the printer until it stops. Hold the sheet until the printer roller grabs
5.
the sheet and feeds it partially into the printer then release the sheet.
If the sheet is not set straight, or if the sheet is less than 100 mm wide, the sheet will not feed and will be
ejected automatically from the feed slot. The printer will beep once and the error lamp will light orange to
indicate a feed error. Remove the sheet from the printer and insert it again. If there is data waiting to be
printed (the POWER lamp will be flashing), press the RESUME button to finish printing.
.
34
34