Canon BJC-50 User Manual page 23

Bubble jet printer
Hide thumbs Also See for BJC-50:
Table of Contents

Advertisement

.
FOLLOW THESE GUIDELINES WHEN STORING AND HANDLING THE BATTERY PACK:
A battery pack is not charged when purchased. You must charge the battery pack for about 4 to 6
hours for it to reach full charge.
For best results, use the battery pack at room temperature. At low temperatures the capacity of the
battery pack is diminished and it will print fewer sheets between recharging sessions.
Never attempt to recharge the battery pack with any device other than the Universal AC Adapter
AD-360U supplied with this printer.
To avoid personal injury from an explosion, never expose the battery pack to an open flame and
never attempt to incinerate an old battery pack.
Used battery packs should be disposed of according to environmental regulations in your country.
For details, contact your Canon Authorised Dealer or Canon representative.
To avoid damaging the contacts on the corner of the battery pack, avoid touching them with any
metal object like a tool, jewellery, the surface of a metal table, etc. Damaged contacts could cause
leaking and serious burns.
To avoid personal injury from corrosive liquids, never attempt to. disassemble the battery pack.
If any liquid from a leaking or broken battery pack gets into your eyes, flush your eyes immediately
with clean water and contact a physician.
Never attempt to connect the battery pack directly to mains (house) current or to a cigarette lighter
socket in an automobile.
Never attempt to use this battery pack for any purpose other than as a power source for this printer.
Never store a battery pack in a location above room temperature.
Remove the battery pack immediately and contact your Canon Authorised Dealer or Canon
Representative if the battery pack shows any signs of warping, releasing a strange odour, leaking
fluid, or overheating. However, do not be concerned if the battery pack feels slightly warm during
recharging; this is perfectly normal.
If you intend to store the printer for a prolonged period (3 months or more), remove the battery
pack. Store the printer and battery pack in a dust-free location away from direct sunlight.
Always handle the battery pack with care to avoid dropping it and damaging its casing and
contacts.
.
21
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents