Canon BJC-50 User Manual page 65

1. POWER
Press the
Attach the AC adapater cord to the right side of the printer and
2.
plug the other end of the AC adapter to a power source.
The CHARGE/ERROR lamp will remain illuminated green until the battery pack is
completely recharged.
3.
When the CHARGE/ERROR lamp goes off, you can disconnect the AC adapter.
The battery pack requires six hours (maximum) to recharge.
The battery pack may become warm during a long print job and may not start recharging until
it has cooled (max. 30 minutes).
button to switch the printer off.
63
63