Midiverb Iii Quick Start; Factory Programs; Selecting Programs; Editing Programs - Alesis MIXING CONSOLES Reference Manual

SECTION 1
The MIDIVERB III contains 200 factory supplied programs, 100 of which
are stored in memory locations 000 to 099 and repeated again in
locations 100 to 199.
Only the programs in locations 100 to 199 can be permanently altered
and stored as desired by the user.
1) Press the
button will light.
2) Press either
displayed.
2A) Select a 3 digit program number from the numbered function
buttons on the right within 4 seconds.
PLEASE NOTE:
—
If only one or two digits are selected within 4 seconds, the display will
revert back to the previous program number.
—
When the MIDIVERB III is first powered up, the unit will be in the
PROGRAM mode and will display the last program that was selected
before being turned off.
1) Select the
the button will light and the PROGRAM LED will turn off.
EDIT
This indicates that the bottom row of functions of the top row of
buttons can be accessed.

MIDIVERB III QUICK START

button. The LED in the middle of the
PROGRAM
button until the desired program is
VALUE
or
button. The lower of the two LEDs adjacent to
EDIT

FACTORY PROGRAMS

SELECTING PROGRAMS

EDITING PROGRAMS

5
QUICK START