Table of Contents
Advertisement
Before using PT-H99 as a cordless phone
Before using your PT-H99 as a cordless phone, you have to:
1. Register your PT-H99 in the Home Base Unit (HBU).
2. Select the HBU's number, because your PT-H99 can be registered in 5 HBUs.
3. Set the PT-H99's mode to PUBLIC & PRIVATE. (See page 128.)
To register your phone in HBU:
1
During power off, press and
hold
,
,
, and
.
2
Enter a cordless phone number,
and press
.
A cordless phone number should be
within 3-digit number.
Cordless phone number
If you entered an incorrect number, press
to delete it.
3
Enter the security code, and
press
.
The security code is a 4-digit number.
Security code
This security code is different from the
one used in security lock. Refer to the
operating manual of HBU.
126
*PT-H99(AH)_08E
126-127
4
Enter a group number (1 – 8),
and press
.
Group number
For the group number, refer to the
operating manual of HBU.
5
Enter HBU number (1 – 5), and
press
.
HBU number
V
Hint:
To cancel the registration of HBU, press
and hold F/SELECT and
during power
off. Then press and hold INT/CLR/HOLD
until "HBU REGISTRATION ERASED"
appears.
To select HBU to connect:
1
In standby mode, press
,
, and
successively.
2
Turn the Easy Shuttle to select
HBU.
3
Press
.
The normal display returns after a few
seconds.
01.10.11, 9:17 PM
127
Advertisement
Table of Contents
