Aiwa PT-H99 Operating Manual page 48

Displaying/storing/restoring current settings
To check the stored settings:
1
In standby mode, press
, and successively.
2
Turn the Easy Shuttle to select
"CONFIRM".
3
Press , and turn the Easy
Shuttle to select "STATE 1",
"STATE 2" or "DEFAULT".
4
Press .
5
Turn the Easy Shuttle to check
the another settings.
6
After you check, press at
least one second to return to
the normal display.
Press shortly to back to the previous
step.
88
*PT-H99(AH)_05E/02 88-89
To store the current settings:
1
, In standby mode, press
, and successively.
2
Turn the Easy Shuttle to select
"RENEW STATE".
3
Press , and turn the Easy
Shuttle to select "STATE 1" or
"STATE 2".
You cannot select "DEFAULT".
4
Press .
5
Press to store the settings
to the selected state.
,
The normal display returns after a few
seconds.
Hints:
• In step 2, you can also use the numeric
button.
2: CONFIRM
3: RENEW STATE
You do not need to press F/SELECT in
step 3.
• In step 3, you can also use the numeric
button.
1: STATE 1
2: STATE 2
3: DEFAULT (check only)
You do not need to press F/SELECT in
step 4.
• In step 5 of "To store the current
settings", you can also use the 1 button.
01.10.11, 9:15 PM
89