Table of Contents
Advertisement
Displaying/storing/restoring current settings
You can check the current settings of your PT-H99, and store those settings so that you can
restore to the stored conditions after making changes.
To check the current settings:
1
In standby mode, press
, and
successively.
2
Turn the Easy Shuttle to check
the another settings.
3
After you check, press
to
return to the normal display.
To restore to the stored state:
1
In standby mode, press
, and
successively.
2
Turn the Easy Shuttle to select
"SELECT STATE".
86
*PT-H99(AH)_05E/02
86-87
3
Press
, and turn the Easy
Shuttle to select "STATE 1",
"STATE 2" or "DEFAULT".
,
Refer to the next page for the settings of
"STATE 1", "STATE 2" and "DEFAULT".
4
Press
.
The normal display returns after a few
seconds.
,
Hints:
• In step 2, you can also use the 1 button.
You do not need to press F/SELECT in
step 3.
• In step 3, you can also use the numeric
button.
1: STATE 1
2: STATE 2
3: DEFAULT
You do not need to press F/SELECT in
step 4.
The default settings of "STATE 1", "STATE 2" and "DEFAULT" are as follows:
STATE 1
STATE 2
RINGER LEVEL
OFF
Volume 2
PAGING MODE
VIBRATION
VIB & BELL
RINGER TONE
Initial settings
Initial settings
BACK LIGHT
AUTO
ON
OPERATE TONE
OFF
ON
AUTO ANSWER
OFF
ON
SUBADDRESS
OFF
OFF
01.10.11, 9:15 PM
DEFAULT
Volume 2
BELL
Initial settings
ON
ON
OFF
OFF
87
Advertisement
Table of Contents
