Table of Contents
Advertisement
Answering a call
1
Press and hold
for one second or longer to power on and enter the
standby mode.
The following display appears.
2
When your phone rings, press
You can talk with the calling party.
You can also press other numeric keys.
The number of the calling party is displayed.
If the calling party's telephone number is registered in the phone book, the name is
displayed.
To end the call:
Press
.
The PT-H99 displays the elapsed time of
the communication, and returns to the
standby mode.
24
*PT-H99(AH)_02E
24-25
For the display in the standby mode, see
page 14.
To prevent from accidental key operation,
you can lock the keys. (See page 26.)
Reception lamp blinks
during ringing.
.
To turn the power off:
Press and hold
for one second or
longer.
Adjusting the volume
You can adjust both the ringer volume and the receiver volume.
To adjust the ringer volume:
1
In standby mode, press
,
, and
successively.
The current ringer volume level is
displayed.
OFF: No sound (
)
Volume 1: Quiet (
)
Volume 2: Normal (
)
Volume 3: Loud (
)
2
Turn the Easy Shuttle.
Upward: Increases the volume.
Downward: Decreases the volume.
After the adjustment, the phone rings at
the level you selected.
3
Press
.
The normal display returns after a few
seconds.
01.10.11, 9:13 PM
To adjust the receiver volume:
During communication, turn the
Easy Shuttle.
Upward: Increases the volume.
Downward: Decreases the volume.
1: Lowest
2: Normal (Default)
3: Higher
4: Highest
The normal display returns after a few
seconds.
25
Advertisement
Table of Contents
