Table of Contents
Advertisement
Recording voice memo or communication
When you perform the following steps, you can record your voice memo or communication.
The operation is the same: communication is recorded when you do this while you are talking
with the other party, and voice memo is recorded when you do this in the standby mode. You
can record a maximum of 30 seconds voice data.
To record voice memo or
communication:
1
In standby mode, or during
communication, press
, and
successively to
start recording.
Remaining
time of
recording
2
Press
or
to end
recording.
Recorded memo or communication is
played back automatically.
Number of
recorded
memo or
communication
After playback, the normal display
returns.
Hints:
• In step 1, recording automatically ends
when 30 seconds elapsed.
• In step 2, you can stop playback by
pressing F/SELECT.
• While recording communication, you
can use the Easy Shuttle to adjust the
receiving volume level.
50
*PT-H99(AH)_04E
50-51
To play back/delete the recording:
1
In standby mode, or during
communication, press
, and
successively.
,
Recorded
date and
time
2
Turn the Easy Shuttle to select
the target recording, then press
to play back.
V
3
Press
to delete, or turn the
Easy Shuttle to select "NOT
DELETE" and press
to leave.
The normal display returns after a few
seconds. If the other recording remains,
the display on step 1 returns.
Hints:
• Recorded date and time appears on
the display only when date and time
are set (See page 19).
• In step 2, you can stop playback by
pressing F/SELECT.
• In step 3, you can also use the numeric
button.
,
1 : DATA DELETE
3 : NOT DELETE
01.10.11, 9:14 PM
51
Advertisement
Table of Contents
