Turning On/Off The Operate Tone; Conserving The Battery Power During Standby - Aiwa PT-H99 Operating Manual

Turning on/off the operate tone

You can turn on or off the operate tone. When you turn it off, no sound will be made even
when you touch a button, make an error, and end an operation.
To turn on the operate tone:
1
In standby mode or during
communication, press
, and successively.
2
Turn the Easy Shuttle to select
"On".
3
Press .
The normal display returns after a few
seconds.
68
*PT-H99(AH)_05E/01 68-69
To turn off the operate tone:
1
In standby mode or during
, communication, press
, and successively.
2
Turn the Easy Shuttle to select
"Off".
3
Press .
The normal display returns after a few
seconds.
Hint:
In step 2, you can also use the numeric
button.
1 : On
3 : Off
You do not need to press F/SELECT in
step 3.

Conserving the battery power during standby

While in the power save mode, your PT-H99 displays only a group of icons located at the top
of the display. If any event happens, such as any button is pressed, a call has arrived, or the
alarm sounds, the PT-H99 restores the normal display.
To set the power save mode:
1
In standby mode, press
,
, and successively.
2
Turn the Easy Shuttle to select
"On".
3
Press .
The PCT enters to the power save mode
after a few seconds.
01.10.11, 9:14 PM
To reset the power save mode:
1
, In standby mode, press
, and successively.
2
Turn the Easy Shuttle to select
"Off".
3
Press .
The normal display returns after a few
seconds.
Hint:
In step 2, you can also use the numeric
button.
1 : On
3 : Off
You do not need to press F/SELECT in
step 3.
,
69