Setting The Language; Setting The Calendar And Time Signal - Aiwa PT-H99 Operating Manual

Setting the language

Your PT-H99 supports Thai and English. The default setting is Thai. You can change the
language as follows.
1
Press and hold for one
second or longer to turn on the
power.
The power is turned on, and the following
display appears.
2
Press , , and
successively.
3
Turn the Easy Shuttle to select
a language icon.
4
Press .
The normal display returns after a few
seconds.
18
*PT-H99(AH)_01E 18-19
Hint:
In step 3, you can also use the numeric
button.
1: Thai
3: English
You do not need to press F/SELECT in
step 4.

Setting the calendar and time signal

Date and time are not set at the factory. You need to set them when you use your PCT for
the first time.
You can also set the time signal so that your PT-H99 beeps every hour. However, PT-H99
does not beep when it is powered off or when you are dialing, talking, or doing a setting
operation.
To set date and time:
1
In standby mode, press ,
, and successively.
2
Key in the date and time with
the numeric buttons.
blinks to prompt your input.
You can also use the Easy Shuttle to
move the input cursor.
3
Press to end the setting.
The normal display returns after a few
seconds.
01.10.11, 9:12 PM
To set the time signal:
1
In standby mode, press ,
, and successively.
2
Turn the Easy Shuttle to select
"ON".
3
Press .
The normal display returns after a few
seconds.
Hint:
In step 2, you can also use the numeric
button.
1: On
3: Off
You do not need to press F/SELECT in
step 3.
19