Setting The Continue Mode - Aiwa PT-H99 Operating Manual

Setting automatic display
To cancel automatic display
1
In standby mode, press
and successively.
2
Turn the Easy Shuttle to select
"AUTO DISPLAY".
3
Press , and turn the Easy
Shuttle to select "Off".
4
Press to cancel the
function.
The normal display returns after a few
seconds.
Hint:
In step 2, you can also use the 5 button.
You do not need to press F/SELECT in
step 3.
102

Setting the Continue mode

When you set the Continue mode, the line is not disconnected after an S-mail is sent, and
you can talk with the other party. However, the number of characters sent as one S-mail is
18 in this mode.
To set the Continue mode:
1
In standby mode, press
and successively.
2
Turn the Easy Shuttle to select
"CONT. MODE".
3
Press
103