Table of Contents
Advertisement
Configure the Switch
Before you can set up the C460 you must install at least one supervisor module and PSU
and then turn on the switch.
You can configure the switch via sideband, inband or outband interfaces.
Connecting the Serial Console Port
Each Avaya C460 supervisor module has one serial port on the front panel for connecting a
terminal, a terminal emulator, or a modem. The serial port on the front panel is labeled "RS-232"
and has an RJ-45 socket.
1
Insert the RJ-45 plug on the console cable into the Console port of the supervisor module.
2
Insert the other end into the RJ-45 socket in the supplied DB-9 adapter.
3
Insert the DB-9 plug into the serial (COM) port on the PC or terminal.
To connect a modem, use the cable and an RJ-45 to DB-25 adapter.
The cable and two adapters are in the Avaya C460 accessory set supplied with the switch.
Avaya CLI Hints and Tips
CLI Command Conventions
• CLI commands for you to enter are in the
• Information displayed on screen as well as parameters of a command are displayed in
font.
computer
• Parameters that you enter are in pointed brackets <>.
• Alternate but mandatory keywords are grouped in braces {} and separated by a bar |.
• Optional keywords are in square brackets [ ] and options are separated by a bar |.
• If you enter an alphanumeric string of two words or more, enclose the string in quotes.
The Avaya CLI has several features which improve ease of use:
• To display all commands available in a context type a question mark.
• To display all commands starting with a certain string, type the first few letters followed by a
question mark.
• To get help containing all commands parameters with their legal values as well as its syntax
and an example, type a question mark at the end of command or at the stage where it is
unique.
• Use the Tab key to complete an unambiguous command.
font.
computer bold
5
Advertisement
Table of Contents
