Turning the Printer ON/OFF
The printer can be turned ON/OFF using the power switch on the right side of the
printer body. Be sure to observe the following instructions in order to prevent
Turning the Printer ON
To use this printer, press " " of the power switch to turn the printer ON. After running
a self-diagnostic test on the printer unit and optional accessories, the printer will be
ready to print.
Do not turn the power ON immediately after turning it OFF. If you want to turn the printer
ON again after turning it OFF, wait at least 10 seconds after turning the printer OFF
before turning it ON again.
Be sure to set the paper cassette in the printer before you turn the power ON for the ﬁrst
time after you install the printer.
Although a sheet of blank paper is output when you turn the power ON for the ﬁrst time
after you install the printer, this is not an error.
Press " " of the power switch on the printer.
The indicators and display on the control panel come on, and the printer initiates a
self-diagnostic test on the printer unit and optional accessories.