Spread the paper guides a little wider than the actual paper
Before loading transparencies or labels, fan them in small
batches and align the edges.
Thoroughly fan in small batches
When loading paper, take care not to cut your hands with the edges of the
Be sure to fan the transparencies or labels thoroughly before loading them. If they
are not fanned enough, multiple sheets of paper may be fed at once, causing paper
When fanning or aligning the transparencies, try to hold the edges to avoid
touching the printing surface.
Take care not to mark or stain the printing surface of the transparencies with
ﬁngerprints, dust, or oil. This may result in poor print quality.
Tap the edges on a flat
surface a few times