Gently load the stack of paper with the printing side facing up
until it touches the back of the tray.
Be sure that the paper stack is loaded under the load limit guides (A).
When loading paper, take care not to cut your hands with the edges of the
The multi-purpose tray can be loaded with up to the number of sheets listed below.
Make sure that the paper stack does not exceed the load limit guides.
- Plain paper (Ex. 64 g/m
- Heavy paper (Ex. 90 g/m
- Heavy paper (Ex. 128 g/m
- Heavy paper (Ex. 199 g/m
Load the paper so that it is straight.
If the rear edge of the paper stack is not properly aligned, this may result in
misfeeds or paper jams.
If the paper is curled or folded at corners, ﬂatten it before loading it in the printer.
If you use paper that has been poorly cut, multiple sheets of paper may be fed at
once. In this case, fan the paper thoroughly, and then align the edges of the stack
on a hard, ﬂat surface.
When custom size paper is printed from LIPS LX Printer Driver, you can load the
paper either in portrait or landscape orientation. However, when you are printing
custom size paper of its long edges 215.9 mm or less with <
set to <
>, load the paper in landscape orientation. When you are not printing
from LIPS LX Printer Driver, load the paper in portrait orientation.
: Approx. 100 sheets
: Approx. 80 sheets
: Approx. 50 sheets
: 30 sheets or less
: 50 sheets or less
: Approx. 40 sheets