Download  Print this page

Canon 3410 User Manual Page 78

Laser beam printer.
Hide thumbs

Advertisement

Message
32 リョウメンインサツ エ
ラー
<Auto Error Skip>
41 ヨウシサイズ カクニン
<Auto Error Skip>
96 サブハイシトレイカクニン
/シメテ クダサイ
9F トナー カクニン
<Warning Message>
PC XXX ヨウシニ コウカ
(xxx indicates abbreviations
of paper sizes)
Cause and Remedy
Cause
The printer received data for 2-sided printing of a
paper size (including the paper orientation) or
paper type on which the printer cannot perform
automatic 2-sided printing.
Remedy Press [
オンライン
the data on each side is printed on two pages.
Cause
The size of the paper loaded in the multi-purpose
tray or paper cassette is different from the setting
for <
手差しトレイ用紙サイズ
2)用紙サイズ
control panel.
Remedy Match the size specified in <
> or <
カセット N(N=1、2)用紙サイズ
size of the loaded paper, and then press [
].
Cause
You are using LIPS LX Printer Driver, and you
loaded custom size paper of its long edges 215.9
mm or less in portrait orientation, and printed
when <
手差しトレイ用紙サイズ
(N=1、2)用紙サイズ
Remedy Load the paper in landscape orientation, then
print again.
Cause
Paper was to be output with the printed side
facing up during automatic 2-sided printing.
Remedy Close the sub-output tray. The printer resumes
printing, and the paper is output to the output tray.
Cause
There is a possibility that a used toner cartridge
that has reached its lifetime is installed.
Remedy Check if the toner cartridge is proper.
Cause
The paper of the size specified in the application
is not loaded in the paper cassette or
multi-purpose tray, or the paper source for the
different paper size is selected.
Remedy Load the paper of the size selected in the
application (or the size specified by scaling
factors) in the selected paper cassette.
] to continue printing. However,
> or <
カセット N(N=1、
> specified from the computer or
手差しトレイ用紙サイズ
> or <
> is set to <
フリー
> and the
オンライ
カセット N
>.
77

Advertisement

Table of Contents

   Related Manuals for Canon 3410

This manual is also suitable for:

Satera lbp3410

Comments to this Manuals

Symbols: 0
Latest comments: